CPO 350 PKPD
Call Today! 800-443-2222
Or stop in for more details about this and other products we offer!
Product Description
Scotchman CPO 350 PKPD, semi-automatic circular cold saw has a pneumatic power down feed with electric valves and has mitering capabilities of up to 135 degrees; 45 degrees to the right and 90 degrees to the left. This 350 mm precision saw is American-made and features double clamping and self-centering vise for maximum material hold. Scotchman’s CPO 350 series of cold saws are powerful machines and can cut through solids, tubing, or pipe and produce burr-free, high-quality, high volume parts. This semi-automatic circular cold saw features electric controls, electric valves, and an electric remote foot pedal. The CPO 350 PKPD is built with dependability and versatility in mind and is backed by our outstanding 3-Year Warranty!
Std. Features
Semi-Automatic Cycle
Air Operated Power Double Self-Centering Vise Assures Burr-Free Cuts
Pneumatic Power Down Feed with Electric Controls
Emergency Stop Button
Miter Capabilities 45 degrees Left and 45 degrees Right
Miter Locking Devise: Quick, Accurate Setting-Stops at 45 degrees Left, Straight 90 Degrees, and 45 Degrees Right
Capable of Slotting
Two Cutting Speeds (LT 22/44 rpm Or HT 44/88 rpm)
Double Reduction, Hardened and Ground Worm and Wheel Gear Box
Worm Wheel of Top Quality Bronze
Chip Drawer
7 Gallon Coolant Tank with Pump
One 12-1/2″ Diameter (315 mm) HSS Blade
One Blade Wrench
One Gallon Concentrated Coolant
230 or 460 Volt /3 Phase Electrics (must specify voltage)
Warranty: Three Years on Parts
Made in USA
Capacities/Specs
Cutting Speeds | Must Specify when Ordering | |
LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe | LT (Low Turn) 22 rpm / 44 rpm |
Motor rate: 3 hp |
HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material | HT (HighTurn) 44 rpm / 88 rpm |
Motor rate: 2.5 hp |
VS (Variable Speed) ~ wired 230/460, 3-ph | VS (Variable Speed) 11 / 177 rpm |
Motor Rate: 5 hp |
VS (Variable Speed) ~ wired 220, 1-ph | VS (Variable Speed) 11 / 177 rpm |
Motor Rate: 5 ph |
SS (Single Speed) designed for 220v 1ph applications | SS (Single Speed) 44 rpm |
Motor Rate: 3 hp |
TUBING Round Square Rectangle SOLID |
90 Degree 4-1/2″ (114 mm) 4-1/4″ x 4-1/4″ (108 x 108 mm) 5-1/2″ x 4″ (140 x 102 mm) 90 Degree |
45 Deg 4″ (102 mm) 4″ x 4″ (102 x 102 mm) 4″ x 4″ (102 x 102 mm) 45 Deg |
Factory Wired | Specify 208 3 ph 230 3 ph 460 3 ph 575 volt 3 ph 60 hz 220 volt 1 ph 60 hz (SS model only) |
|
Maximum Diameter Blade | 350 mm | |
Arbor Bore | 1-9/16″ | 40 mm |
Pin Spacing | 4/12/64 | |
Width | 21-7/8″ | |
Depth | 43-1/2″ | |
Height not including handle | 56-1/4″ | |
Height from floor to vise | 37-7/16″ | |
Shipping Weight | 760 lbs. | (344 kg) |